Our Factory is located in Shenzhen, China. We can ship by air worldwide. It takes 5-7 days to get there.
Bird repelling laser PTZ is a bird repelling device designed and produced for bird prevention work in airports or substations, with a long operating distance and remote real-time control through a remote control system; During work, there is no noise or other pollution, and it will not interfere with the operation of airport aircraft and the normal operation of the substation. Designed with IP66 protection level, it meets the needs of airport and substation bird repellent equipment for long-term outdoor use.
It uses laser to repel birds. Laser could repel birds but do no hurt them. It is a safety and environmental method to repel birds. There are two kinds of basic light beam, line and dot, and cruciform and mesh shape can be customized; two kinds of colour, red and green. Its irradiation distance can achieve 300m-500m during the day. Arbitrarily change its shapes and colors, achieving long-term bird repellent. Supporting low-speed and fast-speed scan through setting preset orbits. Supporting remote working hours setting.
Technological at the highest levels, adaptable to your needs, programmable according to the area of action: all this is summarized in AllGear Laser Bird Repellent PTZ camera , the revolutionary automated laser bollard for the removal of birds . If you need to protect your shed, roof or crop from pests, AllGear Laser Bird Deterrent PTZ camera is the perfect solution for you! Through the appropriate app you can monitor and act on the system directly from your smartphone . This device is equipped with sensors and a camera, and projects a laser beam in the areas manned by birds, causing them to flee immediately!
Features:
♦ Supporting self-locking of the PTZ, a good wind-resistant performance.
♦ Supporting -40°working temperature, a good anti-freezing performance.
♦ 360 degrees horizontal rotation, -90~+90 degree vertical rotation.
♦ Horizontal speed achieves 120 degree/sec
♦ Vertical speed achieve 60 degree/sec.
♦ Aluminium alloy materials, achieving IP66 protection standard.
♦ 520nm laser wavelength.
♦ 1000mw laser power;
♦ Red or green laser colour.
♦Two kinds of basic laser shape, line and dot; customizing mesh, snowflake, crusiform.
♦ Supporting 255 preset.
♦ Supporting cruising and scanning.
♦ Supporting self-learning (trajectory).
♦ Boot up to automatically operate cruises, scans, etc.
Technical data
Laser | wavelength | 520nm/532 nm |
lighting diameter | 20mm (optional) |
power | 2000 mW |
lighting distance | Up to 1000 m |
work mode | Piuse and cw word |
laser beam | Pattern selectable and variable |
laser colour | green |
useful life | >15000 hours |
PTZ | horizontal speed | 0.1 °~120 °/s |
vertical speed | 0.1 °~60 °/s |
horizontal angle | 360 ° continuous |
vertical angle | -90°~ +90° |
preset | 255 |
cruise | Supported, the number of cruise groups can be customized |
scanning | Supported, the number of scanning groups can be customized |
self-learning (trajectory) | Supported, the number of trajectories can be customized |
power-on action | Self learning, preset position, cruise, scanning, power outage recovery |
Interface | RS485 protocol | Supports PELCO-P and PELCO-D (additive) protocols |
Camera | type | 1/2.8” Exmor CMOS |
pixels | 2mp |
optical | 20X |
focal length | f=5.4mm(wide angle)~ 108.0mm(far-end) |
Image Size | (horizontal×vertical) | 1920×1280,60hz,1080i,50hz,1280×720,30hz,720×480,30hz |
Specifictaions | working temperature | -40℃ - 70℃ |
| IP protection standard | IP66 |
| weight | 7 kg |
| power supply | DC12V |
| power | 36W |
